Designing Power for Sensitive Circuits
by Steve Sandler, Signal Integrity Journal, Apr 12 2017
Focus:
Powering sensitive circuits such as oscillators, LNAs, transceivers, mixers and ADCs
requires an understanding of how power supply noise affects the performance of these
circuits. This article explains the three origins of power supply noise, how these noise
sources are summed to create the noise budget for your voltage regulator or dc-dc
converter (“the power supply”), how you must measure the power supply sensitivity of your
sensitive load circuit and the output impedance of your power supply to determine your
noise budget, which you’ll use to pick a voltage regulator or dc-dc converter. The author
discusses three common mistakes designers usually make—what they neglect to measure, how
they overspecify PSRR, and incorrect use of filter beads and ceramic caps to filter the
noise created by the first two mistakes.
What you’ll learn:
- How to select a voltage regulator (or dc-dc converter) for powering noise-sensitive load circuits
- How to calculate (and what to measure) to determine the required noise budget for a voltage regulator used to power noise sensitive circuitry
- How to determine the sensitivity of load circuits to power supply noise
View this Source (requires a PDF Viewer installed on your device)
© 2026 How2Power. All rights reserved.