Want To Dim Your LEDs with a TRIAC Dimmer?
by Ernest Bron, Field Applications Engineer, National Semiconductor Europe, Bodo's Power Systems, Mar 01 2009
Focus:
Triacs provide a simple, low-cost solution for dimming incandescent lamps. But standard TRIAC dimmers cannot be used with LED lamps because LEDs have faster turn-on and turn-off times than incandesents. So using a TRIAC based dimmer with LEDs produces visible flicker. This article describes a dimming circuit based on National Semiconductor's LM3455 LED driver IC, which allows an LED lamp to be dimmed (without flickering) using a standard TRIAC dimmer. The IC translates the TRIAC dimmer trigger point into an average current that can be used to control and drive a string of LEDs. The article describes how the dimmer circuit works when driving a single string of LEDs and then describes how multiple LM3445 ICs can be used in a master/slave configuration for dimming multiple LED strings.
What you’ll learn:
- How to build a dimmer circuit for LED lamps that is controlled by a standard TRIAC dimmer
- How to dim one or more strings of LEDs using a standard TRIAC dimmer
Notes:
Article appears on pages 36-37 of March issue in article archive. You must register to access articles in this magazine's archive.
View this Source (requires a PDF Viewer installed on your device)
© 2025 How2Power. All rights reserved.